Showing posts with label Wayne Yurtin. Show all posts
Showing posts with label Wayne Yurtin. Show all posts

Sunday, August 23, 2026

Engine assembly & intake manifold work…

Engine block is boiled, honed & ready

Camshaft, crankshaft, timing chain, oil pump & correct Cylinder Heads are all installed






Found a correctly dated/correct part # intake manifold on eBay


It needed some clean-up, but it’s the correct intake manifold


Wednesday, June 17, 2026

L75 300hp Engine…

 
It’s time to get the motor to the engine builder…

The Distributor will either need rebuilt or replaced.

The Fuel Pump will also need rebuilt or replaced

Correct GM# 3858403 Bellhousing


None of the pulleys are correct for a ‘65 L75   : (

Correct Flywheel!  Just needs resurfaced.

Correct Exhaust Manifolds

They just need cleaned up…

The Timing Chain cover is correct

The Water Neck is incorrect (and rough)

The engine stamp on the block is very nice!

Zooming in, you can see the original broach marks

Someone painted the stamp pad at some point
There should be no Chevy Orange on the stamp pad

Got everything loaded…

Here at the engine builder’s shop…

As you can see (background), he’s got a lotta motors done & in-process

Thursday, June 11, 2026

Fuel line install…

New fuel line arrived…

Refreshing my memory (using the old fuel line)….


Old Battery tray

The old fuel line hold down bolt threads are filled with powder coat. Need to chase the threads…



Chasing threads…

Fuel line install…


Side note: Fuel line clamps should have the green finish like the one on the left. BUT, original ones had sharp ‘squared off’ edges like the original one on the right. Not a biggie for Jeff’s car…we’ll go with the new reproductions like the left.

New rubber fuel hose from steel fuel line to gas tank. Note, original fuel hoses had no labeling, so I’m removing it with Acetone.

Front stabilizer bar. It was rough (needed some serious sanding)


Stabilizer bar - priming it


Painting the final coat (front stabilizer ‘anti-roll’ bar)

Monday, June 1, 2026

Brake master cylinder, calipers & booster…

  





Original brake master cylinder for a ‘65 power brake car. Needs rebuilt, but rare to see.



Original four brake calipers - very rusted; will need rebuilt & re-sleeved


Original power brake booster


Distributor

Distributor (in need of a serious rebuild) Packing it up & shipping to Jeff… Jeff disassembly, clean, rebuild & test Rebuilt & r...